hvac tools

HVAC Tools

Getting the right HVAC tools and gauges is as important as having the right ingredients in cooking. Furthermore, utilizing the right tools is one big step in having the right system. Thus, it is advisable for HVAC practitioners, especially for beginners, to know what basic tools are currently used today.

One basic HVAC tool is the wrench. This device is used to tighten or loosen bolts (usually those with hex heads) and nuts. There are many kinds of wrenches: open-end, combination, adjustable open-end, flare nut. Most HVAC technicians prefer using the ratchet-type box wrench. They are excellent time savers as they immediately tighten or loosen around nuts and bolts.

For refrigeration and air-conditioning systems, however, they go for the flare nuts. One note for you, though.  The best ones are those that are made of alloy steel because they are tough.

You also check the shape of the opening, see if they can easily hold and release nuts and bolts, as well as the grip.

For HVAC systems, you also need a screwdriver. To allow it to endure twisting torque, choose a screwdriver with tempered tips. Good ones are also with steel shafts. In using this tool, you have to remember some few things. First, a screwdriver can never replace a chisel or a pry bar.

Select the most appropriate device needed at the moment. Second, it is necessary that you maintain the form of the screwdriver’s tip to avoid damage to the implement or injury to yourself.

Pliers are used to hold little objects or to bend or cut wires. Just like the other tools mentioned, there a variety of pliers available that come in different shapes and sizes.

The most ideal for pipe work is the locking-type pliers (Vise-Grips). These pliers have the most effective holding power. Tension degrees are also adjustable. Pliers should never replace wrenches.

Another classic HVAC tool is the hammer, specifically a duct hammer. This is used when installing ducts and air distribution systems. Generally, its face is square and has a chisel-like back. In selecting the right hammer, its handle should be made of steel, wood, or fiberglass. Otherwise, more-than-enough pressure will bend or even break it.

A hacksaw can cut piping materials but not with the ones used for piping circuits that carry refrigerants. Other valuable tools are drills, meters, and gauges.

You can go to your nearest hardware store or shop online when purchasing HVAC tools. There is an extensive list of HVAC tools manufacturers and sellers that offer the best buys and quality products. HVACtool.com carries the widest range of HVAC products from various manufacturers like Amprobe, Fieldpiece, Maglite, to name a few.

Yet technology is starting to play a key role in the development of HVAC tools. There are already software programs available like Elite and Design-Build 6.0 that can do accurate load calculations and duct sizing, among others, without using any more hand tools.

Furthermore, you can practically build your desired HVAC system from scratch, allowing you greater freedom to choose and identify other much-needed HVAC tools.

The truth is it is improbable and impossible to build something without anything to help you get by. In installing and even maintaining an effective and proper HVAC system, you need to have the right kinds of tools—that is, they are really useful in helping you implement your plan. And since they are the likely the same devices you’re going to use in the future, you need to take care of them.

They should always be cleaned and not utilized inappropriately. Handling them with care will not only make them long-lasting but, it will also protect you from injury or accidents.

Categories Parts

Leave a Reply

Your email address will not be published. Required fields are marked *